DM452 Power Cb Microphone With
Cb radio echo power microphone DM-452. Gives your
Cb radio a crisp celar sound, reverb or echo sound. One external echo adjustment
slide control. "Power" and 2nd echo adjustment controls are inside the mic.
**Update September 2016: This item is
back in stock after being unavailable for a few
*Comes wired most 4 pin radios
or choose your own wiring.
*Adjustable echo control on front
adjustment and power control inside mic
*Wired for standard 4 pin Cb
*Requires 9v battery. (not included)
*Add $10.00 for wiring other
than standard 4 pin. (ex. Cobra 148, 5 pin).<br>
*Brand name may vary as the same DM452 mic is
available under several brand names. We currently carry the Workman brand name.
The Aries brand DM452 is no longer made.
**ADJUSTING THE MIC: To set the two variable controls in the back of the
mic for a nice clear sound.
1. Turn the echo control all the way down
2. For the volume you turn it all the off (left) then
just barely turn it enough so that your radio modulates. You only turn it up (to
the right) about 1mm. It's a very slight amount. Any more will make it over
modulate, squeal and pick up a lot of background noise.
3. Set the slide control on the front at
about 1/4 to 1/2.
If you use talkback you
may need to turn the mic gain on your radio down a bit also to keep from getting